Sludge Dewatering

The A3 Screw Press dewaters municipal and industrial sludge in the range of 0.6 to 5% solids, and produces a cake containing 18 to 25% solids. Five models cover capacities from 2 to 100 gpm, in fully automated operation with a continuous screen cleaning system.

  1. Home
  2. Solutions
  3. Sludge Dewatering

How the A3 Screw Press works

The press uses an auger with a tapered shaft that rotates inside a stationary wedge wire drum screen. Sludge is pumped to the inlet end, and the auger transports and presses it against the screen. Filtrate passes through the wedge wire while the cake discharges at the far end.

Screen blinding is handled automatically. Water nozzles on a concentric ring traverse the length of the press, and brushes mounted on the auger flights clean the screen continuously while it runs.

Sludge dewatering screw press with stainless steel wedge wire drum — A3-USA

Capacity and model data

ModelWeight (lb)Power (hp)Max inlet flow (GPM)Inlet solids %
SD2005500.560.6–5
SD4008750.8200.6–5
SD7001,4501.5400.6–5
SD9002,2502.0800.6–5
SD1,2003,0004.01000.6–5


Cake solids: 18–25%. All wetted construction in 304/316L stainless steel, passivated and pickled.

ModelA — Length excl. motor (in)B — Width (in)C — Height to outlet (in)
SP-11062424
SP-21183228
SP-31464335
SP-41775241
SP-51776141

Why a screw press

  • Fully automated operation
  • Automatic washing system for reduced clogging
  • Automatic discharge cone adjustment maximizes performance
  • Low RPM, for low wear
  • Low energy consumption
  • Full enclosure reduces odor
  • Removable covers for ease of maintenance
  • 100% 304/316L stainless steel, passivated and pickled
  • Custom skids with polymer system and control panel as needed
  • Very small sizes available
Heavy industrial equipment for manufacturing or construction transport, mounted on a flatbed trailer.

Applications

The press is applied to municipal and industrial sludge. A3 shows it in municipal plant, food processing and winery service.

Where dewatering fits in the plant

Dewatering is one stage of a treatment train, and the equipment upstream of it changes how hard it has to work. A3 supplies headworks screening, grit treatment, pumps, blowers, UV disinfection and controls alongside the press.

On an existing plant, a treatment plant evaluation establishes what the sludge stream actually looks like before any equipment gets specified.

High-efficiency industrial HVAC units installed on rooftop at construction site, enhancing indoor air quality and ventilation for commercial buildings.

What we need to size a press

Have these ready and sizing is a short conversation:

  • Sludge flow rate and how it varies through the day
  • Feed solids concentration
  • Sludge type and origin primary, secondary, mixed, industrial
  • Required cake solids
  • Whether polymer conditioning is already in place
  • Available footprint and headroom at the proposed location
  • Operating hours per day

Sludge dewatering FAQ

It dewaters municipal and industrial sludge in the range of 0.6 to 5% solids, and produces a cake containing 18 to 25% solids.

Capacities range from 2 to 100 gpm across five models. The smallest units suit small plants and sidestream duty; the largest handles 100 gpm at 4 hp.

An auger with a tapered shaft rotates inside a stationary wedge wire drum screen. Sludge is pumped to the inlet end, and the auger transports and presses it against the screen. Filtrate passes through the wedge wire and cake discharges at the end.

The press runs an automatic cleaning system: water nozzles on a concentric ring that traverses the length of the press, combined with brushes mounted on the auger flights, clean the screen continuously.

All wetted construction is 304/316L stainless steel, passivated and pickled.

Installed motor power ranges from 0.5 hp on the smallest model to 4.0 hp on the largest. The press runs at low RPM, which A3 cites as a factor in both wear and energy consumption.

Yes. Custom skids with polymer systems and a control panel are available as needed.

Municipal and industrial sludge. A3 shows the press in municipal, food processing and winery applications.

Tell us about your sludge

Send flow, feed solids and target cake and we will tell you which model fits.